Products   Planetary Mixers    PowerMix
Quote Request
  General Information  
  Laboratory Models  
  Production Models  
Company Name
Contact Name
Phone Number ext.
Email Address
What batch size do you want to mix? (gallons)
What is the high and low viscosity range of your product during the mixing process? (cps)
What material of construction is preferred? For example: ss type 304, ss type 316, hastelloy
Are any special coatings desired on wetted parts? For example: teflon, kynar
Do you wish to have the interior wetted parts polished? If so, to what finish, For example: 80 grit, 120 grit, 140 grit, 180 grit, mirror finish.
What motor enclosure do you require? For example: explosion proof, tefc, open drip proof
What are your operating input voltage requirements? ( Phase,Hertz,Voltage)?
Do you want to operate under vacuum or pressure? . If yes, please advise vacuum/pressure ratings
Do you want sight or charge ports in the cover? . Please advise how many and the preferred sizes
Do you want to include a jacket on the mix can for heating or cooling?
Do you want a discharge valve in the bottom of the mix can. . If yes, please advise the preferred size
Please describe your control needs & list desired options:
  • (A) Cycle timer
  • (B) Chart recorder
  • (C) PLC Control
  • (D) Speed Indicator
  • (E) Load/Power Indicator
  • (F) Relative Viscosity indicator
  • (G) Temperature Indicator
  • (H) Temperature Controller
  • (I) Vacuum/Pressure Indicator
  • (J) Hydraulic Lift Controls
  • (K) VFD Keyboard Door Mounted
  • (L) 4-20mA Signal Repeaters
  • (M) cUL / UL508 Listing
  • (N) Vessel Light Controls
  • (O) Phase / Low Power Monitor
  • (P) Power Conditioning
  • (Q)Variable or Single Speed
  • (R)Voltage, Cycle, Hz.
  • (S)NEMA 4, 7, 12, Other
  • Do you have any space or installation limitations? For example, overhead height, floor space, utilities.
    What industry are you in? For example, adhesives, pharmaceuticals, plastics.
    Briefly describe your application.
    Is this a new mixing requirement or are you up-dating an existing process? What type of mixer are you currently using?
    Enter The Code Shown In The Image (If You Are Unable To Read Code Properly Shown In The Image, Please Click Here To Load New Code) Code Image - Please contact ONSbiz if you have problems seeing this image code