Skip to content

High Shear Mixer 400 Series - 25HP




Add VFD:

The Inline Model High Shear Rotor-Stator mixer design consists of a single, dual or four stage rotor that turns at high speed within a stationary stator. As the rotating blades pass the stator, they mechanically shear the contents.

The Inline model is a good choice for process lines that require frequent changeover from one product to another. A simple valve can divert finished product downstream or switch instantly from one vessel to another.

Interchangeable rotor-stator combinations provide unlimited flexibility to adopt to a variety of product formulations.

Rotor RPM3,450
Rotor Diameter4.5114
Inlet Diameter376
Outlet Diameter2.564
Overall Height20l.88343
Overall Length23.88616
Overall Width13.94354
Weight970 lbs431 kg
Flow Rate (Water)350 gpm1,325 lpm


  • Four (4) blade 4.5" diameter rotor for operation at 3,450 rpm
  • Slotted stator head


  • Unit is driven by a 25 HP explosion proof motor for use on 230/460 V, 3 Ph., 60 Hz service (starter not included)
  • Single mechanical seal with carbon vs. silicon carbide seal faces, Viton O-rings and maximum operating pressure of 130 psig


  • All product contact parts are type 316 stainless steel
  • All elastomers to be Viton
  • All interior stainless steel surfaces to have a 150 grit finish
  • 3" inlet and 2.5" outlet ANSI flanged connections

Purchasing Online

The Ross Online Store features in-stock ready-to-ship industrial mixers. If you don't see the particular mixer you are looking for, please contact us for more information. The Ross Online Store is currently accepting orders from US customers only. If you are located outside the US, please contact your Ross Representative .